VPI Nomad II
La connectique permet à cette platine d’être reliée directement à un amplificateur stan-dard, voire, à des enceintes amplifiées.
Comme toujours, chez VPI, il est possible de faire évoluer le modèle Nomad II, grâce, par exemple, au plateau du modèle Scout, d’un système de découplage plus sophistiqué, et, le cas échéant, d’un bras de type 3D.
Soigneusement testée, la platine VPI Nomad II est également un instrument de précision, qui permettra de créer une expérience musicale inoubliable !
The Table:
1.25” » thick textured vinyl covered non-resonant MDF chassis.
16″ x 11″ footprint
19” x 14” x6” overall size
Aluminum Platter
Platter rotates on an oil bath bearing and fitted to shaft with a #2 Jacob’s Taper for a concentric rigidly mounted coupling.
The bearing has a PEEK thrust disc and machined graphite impregnated brass bushings using a Thompson Engineering 60 Rockwell case hardened shaft.
Tonearm:
New 9” vertical Yoke type tonearm with lateral turntable type bearing.
Pivot to spindle: 223mm
Effective length: 240.7mm
Overhang: 17.7mm
Offset angle: 22.85 degrees
Average RMS distortion: .36%
VTA adjustable arm mount.
Damped stainless steel armtube.
Very pure copper wire, twisted with special insulating jacket.
The armbase is upgradeable to a standard JMW 9 arm.
Type: Belt drive (manual turntable)
Motor: 24v synchronous AC motor
Turntable Platter: Aluminum
Diameter: 11.81” (30.0 cm)
Turntable Speeds: 33.3 RPM and 45 RPM
Wow and Flutter:
0.06% WOW (in accordance with DIN specification)
0.04% Flutter in accordance with DIN specification)
Rumble: < – 80dB (IEC 98A unweighted)
Cartridge: Ortofon 2M Red
Output: 5 mV @ 1 KHz
Tracking Force: 1.5 grams (recommended)
Input Load: 47K
Weight: 5.5 grams
Power Supply: 110v VAC @ 60 Hz, 230v VAC @ 50hz
Power Consumption: 7.7 watts at full output
Dimensions: 18.5” (470 mm) W x 13.5” (343 mm) D x 4.3” (109 mm)H
Weight: 12.9 lbs. (5.9 kg)
Avis
Il n’y a pas encore d’avis.